· pixma mg pixma mg pixma ix maxify ib pixma pro-1 maxify mb pixma mg pixma tr pixma mpb. · Place the print head back in and lock the lever down. 6. Place all of the ink tanks back in the printer. 7. Close the cover and turn the printer off. 8. Unplug the power from the printer. Leave the power unplugged for about minutes. 9. · If your printer displays a displays a B or related (B, B, etc.) error, this means that the print head built into one or both of the ink cartridges has overheated. You can attempt to replace the ink cartridges in your printer to resolve this. Open the top cover of your printer (as if you were going to change the ink cartridges).
1. Turn OFF the printer and make sure there is plenty of ink left in every tank. 2. From "Devices and Printers" open MP properties and further the "Maintenance" window. 3. From Maintenance section select nozzle cleaning (all colors), preferably the 'deeper' one. B solution to reset the error in three easy steps. Have the same problem with a Pixma MX, approx yrs old.
The dreaded B Error on your Canon Printer usually indicates that the print head has died! Before you go trashing the printer or buying a new one try some of the following suggestions. 1. Remove all ink cartridges and re install new ones. 2. Remove Print Head and thoroughly clean all of the gold contacts on the print head itself. HI I have a Canon MP, and like the poet that I found, I am getting a B message. I have replaced all the print heads. (The ink hadn't run out and some were new) I have cancelled the printing and . The Error B does not exactly indicate the problematic cartridge. Therefore, you should have a rough idea that which cartridge you replaced last. Remove that cartridge gently from the slot.
0コメント